Le test IBM A4040-123 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.
C'est un bon choix si vous prendre l'outil de formation de Pass4Test. Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous aurez plus confiances sur Pass4Test après l'essai de notre démo. Si malheureusement, vous ne passe pas le test, votre argent sera tout rendu.
Avec l'aide du Pass4Test, vous allez passer le test de Certification IBM A4040-221 plus facilement. Tout d'abord, vous pouvez choisir un outil de traîner de IBM A4040-221, et télécharger les Q&A. Bien que il y en a beaucoup de Q&A pour les tests de Certification IT, les nôtres peuvent vous donner non seulement plus de chances à s'exercer avant le test réel, mais encore vous feront plus confiant à réussir le test. La haute précision des réponses, la grande couverture des documentations, la mise à jour constamment vous assurent à réussir votre test. Vous dépensez moins de temps à préparer le test, mais vous allez obtenir votre certificat plus tôt.
Code d'Examen: A4040-123
Nom d'Examen: IBM (Assessment: Power Systems with POWER7 and AIX & Linux Sales Skills -v2)
Questions et réponses: 81 Q&As
Code d'Examen: A4040-221
Nom d'Examen: IBM (Assessment: AIX 7 Administration )
Questions et réponses: 229 Q&As
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test IBM A4040-123 à se preuver. Mais le taux du succès et bien bas. Participer le test IBM A4040-123 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Si vous faites toujours la lutte contre le test IBM A4040-123, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de IBM A4040-123. Si vous avez déjà décidé à s'améliorer via IBM A4040-123, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.
A4040-221 Démo gratuit à télécharger: http://www.pass4test.fr/A4040-221.html
NO.1 After performing a NIM rte install, the administrator noticed that not all filesets are at the
correct Technology Level (TL). What action will help the administrator determine why the
inconsistent fileset levels were installed?
A. On the NIM server, run an Ippchk to identify if the Software Vital Product Data is valid.
B. On the NIM client, run oslevel command against the TL to identify missing prerequisites.
C. Run instfix command on NIM client to determine what filesets are inconsistent.
D. On the NIM server run the NIM IsIpp command to indentify downlevel filesets contained in the
lpp_source.
Answer: D
certification IBM A4040-221 examen certification A4040-221
NO.2 The following information has been reported in an AIX error log:
How can the administrator prevent the error from reoccurring?
A. Create a secondary dump device greater than 266MB
B. Increase primary dump device size greater than 266MB
C. Increase "/var" file system to ensure it has a minimum of 266MB free space
D. Increase "/var/adm/ras/livedump" file system to ensure it has a minimum of 266MB free space
Answer: C
certification IBM A4040-221 certification A4040-221 A4040-221
NO.3 What is a requirement for Live Partition Mobility?
A. The network and disk must be virtual.
B. The disk must be virtual and a Logical Host Ethernet Adapter (LHEA) for network.
C. The client partition must be connected to a SAN.
D. The client partition must be set up as a 'Mover Service Partition'.
Answer: A
IBM examen A4040-221 examen A4040-221 examen
NO.4 Which technology provides the maximum amount of usable storage and resilience for a
system with 6 physical volumes?
A. RAID 0
B. RAID 1
C. RAID 5
D. RAID 6
Answer: C
IBM examen A4040-221 examen A4040-221 examen
NO.5 An LPAR is configured with strict logical volume mirroring across two disks for resilience. The
administrator would like to ensure if one disk fails the volume group stays online. Which command
will ensure that the datavg volume group stays online?
A. varyonvg -n datavg
B. mirrorvg-Q-c 2 datavg
C. mklvcopy -e m -s y (each logical volume name) 2
D. chvg -Qn datavg
Answer: D
certification IBM A4040-221 certification A4040-221 certification A4040-221
NO.6 How can an administrator disable Role Based Access Control (RBAC) in a WPAR?
A. Run chattr -E -I sys0 -a enhanced_RBAC=false Reboot the WPAR
B. Run the RBAC wizard and deselect 'Enable RBAC Reboot the system
C. Run chdev -I mywpar -a enhanced_RBAC=false Reboot the Global Environment
D. Run chwpar -a RBAC=false Reboot the WPAR
Answer: C
certification IBM A4040-221 examen A4040-221 examen A4040-221 examen A4040-221 examen
NO.7 What is the difference between deferred and concurrent firmware updates?
A. Deferred firmware can be applied concurrently but contains updates that affect the internal
program load path, which are not activated until the next time the server is shut down and restarted.
B. Concurrent firmware must be done on all LPARs in the frame at the same time. Deferred
firmware can be loaded on each LPAR at a different time and only becomes active when the LPAR is
shutdown and restarted.
C. Deferred firmware can only be applied during an outage to the managed system as it will
automatically shut the managed system down during its installation.
D. Concurrent firmware is only for minor fixes to the system mircocode while deferred firmware
contains major fixes to the service processor.
Answer: A
certification IBM certification A4040-221 certification A4040-221 certification A4040-221
NO.8 A host has a single virtual Ethernet adapter (ent0) configured with only a default PVID, and the
administrator is trying to determine why it cannot be used to reach any other system on the
network. He suspects that it may be caused by a problem in the VLAN configuration.
How would the administrator determine the VLAN for which the adapter was configured?
A. Use the command 'Isdev -I ent0' on the host to determine the port VLAN ID.
B. Use the command 'Isattr-EI ent0' on the host to determine the port VLAN ID.
C. Look on the HMC to determine which VLAN is configured for the adapter.
D. Examine the Shared Ethernet Adapter on the Virtual I/O Server to determine which VLAN the
adapter is using.
Answer: C
IBM A4040-221 examen certification A4040-221 certification A4040-221
没有评论:
发表评论