Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test HP HP0-J33 à se preuver. Mais le taux du succès et bien bas. Participer le test HP HP0-J33 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test HP HP0-J33 sans aucune doute si vous choisissez le Pass4Test.
Pass4Test peut offrir la facilité aux candidats qui préparent le test HP HP0-J33. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A HP HP0-J33 selon le résumé de test réel HP HP0-J33. Vous pouvez réussir le test à la première fois sans aucune doute.
Vous choisissez l'aide de Pass4Test, Pass4Test fait tous effort à vous aider à réussir le test. De plus, la mise à jour de Q&A pendant un an est gratuite pour vous. Vous n'avez plus raison à hésiter. Pass4Test est une meilleure assurance pour le succès de test HP HP0-J33. Ajoutez la Q&A au panier.
Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification HP HP0-J33 via son guide d'étude. Est-ce que vous vous souciez de test Certification HP HP0-J33? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.
Code d'Examen: HP0-J33
Nom d'Examen: HP (Implementing HP )
Questions et réponses: 65 Q&As
Aujoud'hui, c'est une société de l'informatique. Beaucoup d'organisations peut provider l'outil de se former pour le test Certification HP HP0-J33. Mais on doit admettre que ces site n'ont pas la capacité à offrir une bonne Q&A, elles sont généralement très vagues et sans les points. C'est loin d'attirer les attentions des candidats.
Après une longue attente, les documentations de test HP HP0-J33 qui combinent tous les efforts des experts de Pas4Test sont finalement sorties. Les documentations de Pass4Test sont bien répandues pendant les candidats. L'outil de formation est réputée par sa haute précision et grade couverture des questions, d'ailleurs, il est bien proche que test réel. Vous pouvez réussir le test HP HP0-J33 à la première fois.
HP0-J33 Démo gratuit à télécharger: http://www.pass4test.fr/HP0-J33.html
NO.1 for the HP EVA, where do you find error messages, status code values, meanings, and appropriate
corrective actions?
A. product replacement instructions
B. WEBES System Event Analyzer
C. product user guide
D. HP CommandView EVA
Answer: C
HP certification HP0-J33 HP0-J33 certification HP0-J33
NO.2 Which statements are true about using thin provisioning in an EVA environment? (Select two.)
A. Extension of a LUN cannot be automated.
B. Capacity utilization is increased.
C. LUN shrink is not always supported for EVA.
D. Host agents must be installed on servers.
E. It can be performed within CommandView EVA.
Answer: BD
HP certification HP0-J33 certification HP0-J33
NO.3 Which interface is used to connect a FATA drive to an EVA controller? (Select two.)
A. single port
B. dual port
C. Serial ATA
D. Native Fibre Channel
E. Parallel ATA
Answer: BD
certification HP HP0-J33 examen HP0-J33
NO.4 Which components are mandatory Customer Self Repair (CSR) on an EVA4400, EVA6400 or
EVA8400 device shelf? (Select three.)
A. midplane
B. power supply
C. fan
D. backplane
E. disk drive
F. power UID board
Answer: BCE
HP examen HP0-J33 HP0-J33 HP0-J33
NO.5 A disk group is set to double protection level and contains only Vraid1 virtual disks. What happens
when there is simultaneous loss of two physical disks from different mirrored pairs within the same
Redundant Storage Set?
A. The Vraid1 fails and there is data loss.
B. Vraid1 data migrate to Vraid5.
C. The Vraid1 virtual disk stays in degraded mode and data is preserved.
D. The Vraid1 data from the failed disks is reconstructed.
Answer: D
HP examen certification HP0-J33 certification HP0-J33 certification HP0-J33
NO.6 You create a Vraid0 LUN in an EVA with 16 disks consisting of two 8-drive RSS sets. What will happen
if a single disk fails?
A. The LUN will fail even with an RSS configured.
B. The LUN will continue to operate normally due to the redundancy provided by the RSS sets.
C. The LUN cannot be configured across two RSS sets.
D. The LUN will continue to operate at reduced performance while the RSS sets rebuild the lost data.
Answer: A
HP HP0-J33 certification HP0-J33 HP0-J33 HP0-J33
NO.7 What happens when you set the failure protection level for a disk group with same-sized disks on an
EVA to single?
A. Two disks are reserved as spare space.
B. A one-disk equivalent is reserved as spare space.
C. One disk is reserved as spare space.
D. A two-disk equivalent is reserved as spare space.
Answer: D
HP HP0-J33 HP0-J33 examen certification HP0-J33 certification HP0-J33
NO.8 What is the source of the identifying data that is inserted into the HP CommandView EVA SNMP MIB
when it is generated?
A. SMI-S agent on management host
B. hardware ASIC in the first host port that sends the event
C. default parse file
D. controller software-specific parse file
Answer: D
HP HP0-J33 HP0-J33 examen
NO.9 Which EVA virtualization features help reduce customer Total Cost of Ownership? (Select two.)
A. load customization
B. LUN definition ruleset
C. pre-set VRAID security
D. reduced stranded capacity
E. significantly increased utilization
Answer: DE
HP HP0-J33 examen HP0-J33 HP0-J33 examen
NO.10 Which interconnect technology is used when integrating the mpx110 router into an EVA solution?
A. FCIP
B. FICON
C. iSCSI
D. WDM
Answer: A
HP certification HP0-J33 certification HP0-J33 HP0-J33
NO.11 Which feature is unique to the EVA4400 compared to the EVA6400 and EVA8400?
A. support of 2048 LUNs
B. use of array-based management
C. RoHS 6 of 6 compliant disk shelves
D. large LUN support
Answer: B
HP examen HP0-J33 examen HP0-J33 examen HP0-J33
NO.12 Which feature is unique to the EVA8400 / 11GB cache (per controller) model when compared to other
EVA array models?
A. use of a third cache battery
B. 400TB addressable storage space
C. up to 5GB policy memory
D. maximum of 27 device shelves
Answer: A
HP examen HP0-J33 examen certification HP0-J33 certification HP0-J33
NO.13 What are required customer self-repair (replacement) parts in an EVA6400/8400? (Select two.)
A. controller cache battery
B. controller cache memory
C. hard disk drives
D. disk enclosure fan
E. Fibre Channel transceivers
Answer: CD
certification HP HP0-J33 certification HP0-J33 HP0-J33
NO.14 What are functions of the web-based operator control panel of an EVA4400? (Select three.)
A. view OCP log messages
B. configure SMI-S credentials
C. restart a controller
D. perform disk firmware upgrade
E. enter WWN to initialize system
F. perform array firmware upgrade
Answer: ACE
HP HP0-J33 HP0-J33 HP0-J33
NO.15 Which service is included in the EVA6400/8400 warranty?
A. HP Support Plus service
B. HP EVA Firmware Upgrade service
C. HP Implementation service
D. HP Installation & Startup service
Answer: D
HP HP0-J33 HP0-J33 HP0-J33
NO.16 How does releveling occur after the loss of one disk in a 16-member group containing ten 10GB
Vraid1 Vdisks?
A. The group does not need to relevel.
B. across 16 disks in the group
C. across 15 disks in the group
D. across 14 disks in the group
E. across 10 disks in the group
Answer: D
HP examen HP0-J33 HP0-J33 examen HP0-J33
NO.17 Which statements are true about mirrorclones? (Select two.)
A. If the mirrorclone is in a normalized state, you can only detach it.
B. The redundancy (Vraid) level of a mirrorclone must be the same or higher than the source.
C. Amirrorclone delta restore may be made when the mirrorclone source is also the source for a DR
group.
D. A detached mirrorclone cannot be reattached to its source.
E. HP recommends keeping mirrorclones in the same disk group as the source.
Answer: CD
HP HP0-J33 examen HP0-J33 examen
NO.18 What must be considered when configuring the Internet Protocol settings of an EVA4400
management module?
A. The WOCP requires an IPv6 network.
B. The IP address range is restricted.
C. A limited set of protocols is supported.
D. The localhost alias must be disabled.
Answer: B
HP examen certification HP0-J33 HP0-J33 HP0-J33 examen HP0-J33 certification HP0-J33
NO.19 How do you access the web-based operator control panel after installing CommandView EVA on the
management module?
A. https://<storagesystem>:2373
B. https://<storagesystem>:2372
C. https://<storagesystem>:2301
D. https://<storagesystem>:2381
Answer: A
certification HP HP0-J33 HP0-J33 certification HP0-J33 HP0-J33
NO.20 What is a physical segment (PSEG) in the EVA context?
A. smallest virtual disk space allocated on a disk drive
B. smallest physical disk space allocated on a disk drive
C. disk space containing information about the selected redundancy level of the virtual disk
D. data portion read from or written to a physical disk before the next physical disk is accessed
Answer: B
HP certification HP0-J33 certification HP0-J33
Le guide d'étude de Pas4Test comprend l'outil de se former et même que le test de simulation très proche de test réel. Pass4Test vous permet de se forcer les connaissances professionnelles ciblées à l'examen Certification HP HP0-J33. Il n'y a pas de soucis à réussir le test avec une haute note.
没有评论:
发表评论