Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test IBM 000-541 à se preuver. Mais le taux du succès et bien bas. Participer le test IBM 000-541 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Le Certificat de IBM 000-541 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat IBM 000-541, c'est-à-dire avoir une grande fortune. Le Certificat IBM 000-541 peut bien tester des connaissances professionnelles IT. La Q&A IBM 000-541 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Code d'Examen: 000-541
Nom d'Examen: IBM (DB2 9.7 DBA for Linux UNIX and Windows)
Questions et réponses: 104 Q&As
La population de la Certification IBM 000-541 est très claire dans l'Industrie IT. Pass4Test se contribue à vous aider à réussir le test, de plus, un an de la mise à jour gratuite pendant est gratuite pour vous. Pass4Test sera le catalyseur de la réalisation de votre rêve. Pour le succès demain, Pass4Test est votre von choix. Vous serez le prochain talent de l'Indutrie IT sous l'aide de Pass4Test.
Finalement, la Q&A IBM 000-541 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test IBM 000-541 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification IBM, vous aurez un meilleur salaire et une plus grande space à se développer.
La partie plus nouvelle de test Certification IBM 000-541 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel IBM 000-541. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.
Selon les feedbacks les professionnels bien réputés dans l'Industrie IT, Pass4Test est un bon catalyseur de leurs succès. L'outil de formation offert par Pass4Test leur aide d'économiser le temps et l'argent, le plus important est qu'ils aient passé le test IBM 000-541 avec succès. Pass4Test est un fournissur fiable. Vous allez réaliser votre rêve avec l'aide de Pass4Test.
000-541 Démo gratuit à télécharger: http://www.pass4test.fr/000-541.html
NO.1 Which administrative authority is needed to run the audit stored procedures
and table functions such as the AUDIT_DELIM_EXTRACT stored procedure?
A DBADM
B SECADM
C SQLADM
D SYS ADM
Answer: B
certification IBM 000-541 000-541
NO.2 What are three authorization categories in DB2? (Choose three.)
A System-level
B Database-level
C Network-level
D Object-level
E Instance-level
Answer: ABD
IBM examen 000-541 000-541 examen certification 000-541 000-541 certification 000-541
NO.3 What are three system and database level authorizations available with
DB2? (Choose three.)
A SYSMON
B SYSMNT
C DBCTRL
D SYS ADM
E DBADM
Answer: A D E
IBM certification 000-541 000-541 examen 000-541
NO.4 Click the Exhibit button.
In the exhibit, where would the authentication of the supplied userid and
password from a remote client take place?
A. AIX operating system
B. LDAP Server
C. Kerberos Server
D. "MyPlugin.so" GSS-API plug-in
Answer: B
IBM examen 000-541 examen 000-541
NO.5 A DBA wants to use Label Based Access Control (LBAC) to protect Individual
rows in a table.
Which data type must be used to create a column to hold the necessary LBAC
security data?
A. SYSPR0C.DB2LBACU\BEL
B. SYSPR0C.DB2SECURITYU\BEL
C. SYSIBM .DB2LBACLABEL
D. SYSIBM .DB2SECURITYLABEL
Answer: D
IBM 000-541 000-541 000-541 000-541
NO.6 Click the Exhibit button
Given the INSERT statements shown below:
INSERT INTO applicant VALUES (1 , ¯ ¡¯ 5 4
INSERT INTO applicant VALUES (2, 'F ¯, 38 )
INSERT INTO applicant VALUES (3, ® ¡¯, 2 1
INSERT INTO applicant VALUES (4, 'F ¯, 91 )
INSERT INTO applicant VALUES (5, 'C ¯, 50 )
INSERT INTO applicant VALUES (6, 'C ¯, 70 )
INSERT INTO applicant VALUES (7, 'C ¯, 95 )
How many rows will be successfully inserted?
A. 1
B. 3
C. 5
D. 7
Answer: C
certification IBM certification 000-541 000-541 000-541
NO.7 BOB and ALICE moved from the DEVELOPER group to the ANALYST group.
As the security administrator, which two commands would remove Bob and Alice
from the DEVELOPER group? (Choose two.)
A. REVOKE ROLE developer FROM bob, alice
B. REVOKE GROUP developer FROM bob, alice
C. REVOKE ROLE developer FROM USER bob, USER alice
D. REVOKE GROUP developer FROM USER bob, USER alice
Answer: A C
IBM examen certification 000-541 certification 000-541 000-541 000-541 examen
NO.8 Which two can be replicated using HADR? (Choose two.)
A. database configuration changes
B. CREATE TABLE ... NOT LOGGED INITIALLY operations
C. Data Definition Language (DDL) statements
D. LOAD operations
Answer: C D
IBM examen certification 000-541 000-541
NO.9 Which two plug-in types does the DB2 database system provide? (Choose two.)
A. Group retrieval
B. Kerberos authentication
C. Server authentication
D. Encryption authentication
Answer: A C
certification IBM certification 000-541 certification 000-541
NO.10 Given the DDL shown below:
CREATE TABLE tab1 (coll SMALLINT );
CREATE VIEW v1 AS SELECT coll FROMtabl WHERE coll > 25 ;
CREATE VIEW V2 AS SELECT COI1 FROM v1 WITH CASCADED CHECK OPTION
CREATE VIEW v3 AS SELECT coll FROM v2 WHERE coll < 100 ;
Which statement will fail?
A. INSERT INTO v2 VALUES (35)
B. INSERT INTO v1 VALUES (5)
C. INSERT INTO v3 VALUES (25)
D. INSERT INTO v3 VALUES (200)
Answer: C
IBM certification 000-541 000-541 examen 000-541 000-541 examen
NO.11 Which set of procedures will be required to perform a rolling upgrade
in a HADR environment?
A 1. Upgrade the system where the primary database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
B 1. Upgrade the system where the standby database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
C 1. Upgrade the system where the primary database resides.
2. Issue the TAKEOVER HADR command on the primary database server.
3. Upgrade the new primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
D 1. Upgrade the system where the standby database resides.
2. Issue the TAKEOVER HADR command on the standby database server.
3. Upgrade the original primary database.
4. Return to the original configuration by switching the roles of the
primary and standby databases.
Answer: D
certification IBM 000-541 certification 000-541 certification 000-541
NO.12 If a non-recoverable database crashes, how can a DBA successfully restart
the database if a table space is damaged and cannot complete crash recovery?
A. The database must be restarted using the RESTART DATABASE command with
the DROP PENDING TABLESPACES option specified. At that point, the database
can be brought on-line and the damaged table space must be dropped and
re-created.
B. The damaged table space must be restored from the latest backup and any
active transaction logs in the log path can then be applied to it using the
TABLESPACE ONLINE option of the ROLLFORWARD DATABASE command. This will bring
the table space on-line and synchronize it with the rest of the database.
C. The damaged table space must be restored from the latest backup image.
Once restored from the backup image, the RESTART DATABASE command can be issued
to apply all the relevant transactions from the active logs. At that point,
the database will come on-line and all table spaces will be synchronized.
D. The damaged table space will require that the entire database be restored
from the latest backup image because the database is non-recoverable and will
not be accessible.
Answer: A
IBM examen 000-541 certification 000-541 certification 000-541
NO.13 Because of an application abend, a database named PAYROLL needs to be
restored to approximately 9:26 am on June 1, 2009. After the database is
restored from a backup image, the command shown below is executed:
ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002
USING LOCAL TIME AND STOP
When this command is executed, the error shown below is generated:
SQL4970N Roll-forward recovery on database "PAYROLL" cannot reach the
specified stop point (end-of-log or point-in-time) because of missing log
file(s) on node(s) "0".
Which two commands could be used to resolve this error? (Choose two.)
A. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP
B. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING UTC TIME
AND STOP
C. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING LOCAL
TIME AND STOP OVERFLOW LOG PATH /mnt/arclog
D. ROLLFORWARD DATABASE payroll TO 2009-06-01-09.26.44.609002 USING UTC TIME
AND STOP NORETRIEVE MISSING RECORDS
Answer: A C
IBM 000-541 examen certification 000-541 000-541 examen
NO.14 Which HADR feature minimizes the impact of software maintenance on the
Standby server?
A. Configure all AUTOMATIC features.
B. Configure all AUTOMATIC maintenance parameters.
C. Configure AUTOMATIC maintenance and perform a rolling upgrade
D. Configure AUTOMATIC maintenance and perform a roll forward.
Answer: C
IBM certification 000-541 000-541 000-541
NO.15 Due to an application error, some data was deleted from a very large table
residing in table space TS1. The table space was then renamed TS2 before the
error was detected. Rather than try and rebuild this table, it was decided
that database DB1 would be restored and then rolled forward to a point-in-time
(PIT) before the delete operation took place. Unfortunately the PiT roll
forward was done to a time that was too early and some critical transactions
were missing when the database was brought back on-line.
Which steps must be taken to ensure that the critical transactions which are
currently missing from the database are correctly applied to the database
and that table space TS1 is renamed TS2?
A 1. Restore database DB1.
2. Roll forward to the correct point-in-time.
3. Rename TS1 to TS2.
B 1. Restore table space TS1 from the DB1 backup image.
2. Roll forward to the correct point-in-time.
3. Rename table space TS1 to TS2.
4. Re-run the batch processes.
C 1, Restore database DB1
2. Roll forward to end of logs.
D 1. Restore table space TS1 from the DB1 backup image.
2. Roll forward to end of logs.
Answer: A
IBM 000-541 examen certification 000-541 000-541 examen
NO.16 .A database named PAYROLL was backed up on Sunday. On Tuesday, a table space
in the PAYROLL database was renamed from TBSP1 to EMPINFO_TBSP. On Thursday,
the database was restored from the backup image created on Sunday.
Which command must be issued to roll the renamed table space forward to the
current date and time?
A. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbspl)
B. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP
TABLESPACE(empinfo_tbsp)
C. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbsp 1
TO empinfo_tbsp)
D. ROLLFORWARD DATABASE payroll TO END OF LOGS AND STOP TABLESPACE(tbsp 1
RENAME empinfo_tbsp)
Answer: B
IBM examen 000-541 examen 000-541 examen 000-541 examen 000-541 000-541 examen
NO.17 Which statement is correct about informational constraints?
A. An informational constraint can be used by the SQL compiler to improve
the access to data and query performance.
B. The database manager uses an informational constraint to enforce the
uniqueness of the key during changes to the columns of the unique constraint.
C. An informational constraint is a column or combination of columns that
has the same properties as a unique constraint.
D. An informational constraint specifies that every row that is inserted or
updated in the table must conform to the definition of the table.
Answer: A
IBM examen 000-541 000-541
NO.18 Click the Exhibit button.
Refer to the logging configuration parameters shown in the exhibit.
What will happen if there are currently 100 active log files and DB2 needs
to create log file 101?
A. At least one application will receive a "log full" error and at least one
transaction will be rolled back because the active log space is full.
B. Log file 101 will go into the OVERFLOWLOGPATH directory since the active
log space is full and infinite logging has been enabled.
C. The database will appear to be hung since the active log space is full
and the BLK_LOG_DSK_FUL parameter is set to YES.
D. Log file 101 will be successfully created in the primary log path since
infinite logging has been enabled. Applications will continue processing
normally.
Answer: D
IBM examen 000-541 000-541 examen
NO.19 A database administrator takes a full backup of the PRODUCTS database
every Sunday. During the week, two other backups are taken, one on Tuesday
and one on Thursday. The PRODUCTS database is about 800 GB in size, and about
20 percent of the data is modified throughout a week.
Assuming that backup times need to be kept to a minimum, which command should
be used to produce the Tuesday and Thursday backup images?
A. BACKUP DATABASE products TO /mnt/backup
B. BACKUP DATABASE products INCREMENTAL TO /mnt/backup
C. BACKUP DATABASE products TO /mnt/backup UTIL_IMPACT_PRIORITY 10
D. BACKUP DATABASE products INCREMENTAL DELTA TO /mnt/backup
Answer: D
IBM certification 000-541 000-541 examen certification 000-541
NO.20 How does the DB2 Server identify the list of GSS-API plug-ins it supports?
A. by using the SRVCON_GSSPLUGIN_LIST database manager configuration
parameter
B. by using the SRVCON_GSSPLUGIN_LIST registry variable
C. by using the SRVSUPP_GSSPLUGIN_LIST database manager configuration
parameter
D. by using the SRVSUPP_GSSPLUGIN_LIST registry variable
Answer: A
IBM 000-541 000-541 000-541 000-541 000-541 examen
Le Certificat de IBM 000-541 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification IBM 000-541, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 000-541 sans aucun éffort, en même temps, le test de IBM 000-541 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test IBM 000-541 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.
没有评论:
发表评论